RingCentral.CallLogRecord Class Reference

Call log record. More...

Properties
ExtensionInfoCallLog	extension [get, set]
string	telephonySessionId [get, set]
	Telephony identifier of a call session.
string	sipUuidInfo [get, set]
	Call session identifier, required for Telephony REST API.
CallLogRecordTransferTarget	transferTarget [get, set]
CallLogRecordTransferee	transferee [get, set]
string	partyId [get, set]
	Internal Identifier of Participant.
string[]	metadataCategories [get, set]
	List of metadata categories applied to the call.
string	transport [get, set]
	The type of call transport. 'PSTN' indicates that a call leg was initiated from the PSTN network provider; 'VoIP' - from an RC phone. Enum: PSTN, VoIP.
CallLogFromParty	from [get, set]
CallLogToParty	to [get, set]
string	type [get, set]
	The type of call Required Enum: Voice, Fax.
string	direction [get, set]
	The direction of a call Required Enum: Inbound, Outbound.
CallLogRecordMessage	message [get, set]
CallLogDelegateInfo	delegate [get, set]
string	delegationType [get, set]
	Call delegation type Enum: Coworker, QueueForwarding, Unknown.
string	action [get, set]
	The internal action corresponding to the call operation Required Enum: Accept Call, Barge In Call, Call Park, Call Return, CallOut-CallMe, Calling Card, Conference Call, E911 Update, Emergency, External Application, FindMe, FollowMe, FreeSPDL, Hunting, Incoming Fax, Monitoring, Move, Outgoing Fax, Paging, Park Location, Phone Call, Phone Login, Pickup, RC Meetings, Ring Directly, RingMe, RingOut Mobile, RingOut PC, RingOut Web, Sip Forwarding, Support, Text Relay, Transfer, Unknown, VoIP Call, VoiceChat Call.
string	result [get, set]
	The result of the call operation Enum: 911, 933, Abandoned, Accepted, Answered Not Accepted, Blocked, Busy, Call Failed, Call Failure, Call connected, Carrier is not active, Declined, EDGE trunk misconfigured, Fax Not Sent, Fax Partially Sent, Fax Poor Line, Fax Receipt Error, Fax on Demand, Hang Up, IP Phone Offline, In Progress, Internal Error, International Disabled, International Restricted, Missed, No Answer, No Calling Credit, Not Allowed, Partial Receive, Phone Login, Receive Error, Received, Rejected, Reply, Restricted Number, Send Error, Sent, Sent to Voicemail, Stopped, Suspended account, Unknown, Voicemail, Wrong Number, Answered Elsewhere, Callback requested.
string	reason [get, set]
	The reason of the call result:
string	reasonDescription [get, set]
	The detailed reason description of the call result.
string	startTime [get, set]
	The call start datetime in ISO 8601 format including timezone, for example 2016-03-10T18:07:52.534Z Required Format: date-time.
long?	duration [get, set]
	Call duration in seconds Format: int64.
long?	durationMs [get, set]
	Call duration in milliseconds Format: int64.
CallLogRecordingInfo	recording [get, set]
bool?	shortRecording [get, set]
	Indicates that the recording is too short and therefore wouldn't be returned. The flag is not returned if the value is false.
BillingInfo	billing [get, set]
string	internalType [get, set]
	The internal type of the call Enum: Local, LongDistance, International, Sip, RingMe, RingOut, Usual, TollFreeNumber, VerificationNumber, Vma, LocalNumber, ImsOutgoing, ImsIncoming, Unknown.
bool?	finished [get, set]
	Indicates whether the call has reached a finished state.
string	id [get, set]
	Internal identifier of a call log record Required.
string	uri [get, set]
	Canonical URI of a call log record Required Format: uri.
string	sessionId [get, set]
	Internal identifier of a call session Required.
bool?	deleted [get, set]
	Indicates whether the record is deleted. Returned for deleted records, for ISync requests.
CallLogRecordLegInfo[]	legs [get, set]
	For 'Detailed' view only. Leg description.
string	lastModifiedTime [get, set]
	For 'Detailed' view only. The datetime when the call log record was modified in (ISO 8601)[https://en.wikipedia.org/wiki/ISO_8601] format including timezone, for example 2016-03-10T18:07:52.534Z Format: date-time.

Detailed Description

Call log record.

Property Documentation

reason

string RingCentral.CallLogRecord.reason

getset

The reason of the call result:

• Accepted - The call was connected to and accepted by this number
• Connected - The call was answered, but there was no response on how to handle the call (for example, a voice mail system answered the call and did not push "1" to accept)
• Line Busy - The phone number you dialed was busy
• Not Answered - The phone number you dialed was not answered
• No Answer - You did not answer the call
• Hang Up - The caller hung up before the call was answered
• Stopped - This attempt was stopped because the call was answered by another phone
• Internal Error - An internal error occurred when making the call. Please try again
• No Credit - There was not enough Calling Credit on your account to make this call
• Restricted Number - The number you dialed is restricted by RingCentral
• Wrong Number - The number you dialed has either been disconnected or is not a valid phone number. Please check the number and try again
• International Disabled - International calling is not enabled on your account. Contact customer service to activate International Calling
• International Restricted - The country and/or area you attempted to call has been prohibited by your administrator
• Bad Number - An error occurred when making the call. Please check the number before trying again
• Info 411 Restricted - Calling to 411 Information Services is restricted
• Customer 611 Restricted - 611 customer service is not supported. Please contact customer service at <(888) 555-1212>
• No Digital Line - This DigitalLine was either not plugged in or did not have an internet connection
• Failed Try Again - Call failed. Please try again
• Max Call Limit - The number of simultaneous calls to your account has reached its limit
• Too Many Calls - The number of simultaneous calls for per DigitalLine associated with Other Phone has reached its limit. Please contact customer service
• Calls Not Accepted - Your account was not accepting calls at this time
• Number Not Allowed - The number that was dialed to access your account is not allowed
• Number Blocked - This number is in your Blocked Numbers list
• Number Disabled - The phone number and/or area you attempted to call has been prohibited by your administrator
• Resource Error - An error occurred when making the call. Please try again
• Call Loop - A call loop occurred due to an incorrect call forwarding configuration. Please check that you are not forwarding calls back to your own account
• Fax Not Received - An incoming fax could not be received because a proper connection with the sender's fax machine could not be established
• Fax Partially Sent - The fax was only partially sent. Possible explanations include phone line quality to poor to maintain the connection or the call was dropped
• Fax Not Sent - An attempt to send the fax was made, but could not connect with the receiving fax machine
• Fax Poor Line - An attempt to send the fax was made, but the phone line quality was too poor to send the fax
• Fax Prepare Error - An internal error occurred when preparing the fax. Please try again
• Fax Save Error - An internal error occurred when saving the fax. Please try again
• Fax Send Error - An error occurred when sending the fax. Please try again
• Emergency Address not defined - The call was rejected due to no E911 address
• Carrier is not active - The call was rejected due to carrier inactivity
• EDGE trunk misconfigured - The call was rejected due to error in EDGE trunk configuration
• Internal Call Error - An internal error occurred when making the call. Please try again
• Receive Error - Fax receive error Enum: Accepted, Bad Number, Call Loop, Calls Not Accepted, Carrier is not active, Connected, Customer 611 Restricted, EDGE trunk misconfigured, Emergency Address not defined, Failed Try Again, Fax Not Received, Fax Not Sent, Fax Partially Sent, Fax Poor Line, Fax Prepare Error, Fax Save Error, Fax Send Error, Hang Up, Info 411 Restricted, Internal Call Error, Internal Error, International Disabled, International Restricted, Line Busy, Max Call Limit, No Answer, No Credit, No Digital Line, Not Answered, Number Blocked, Number Disabled, Number Not Allowed, Receive Error, Resource Error, Restricted Number, Stopped, Too Many Calls, Unknown, Wrong Number

---

The documentation for this class was generated from the following file:

• RingCentral.Net/Definitions/CallLogRecord.cs